Logo Lamp EOL Testing Equipment
HY logo lamp EOL testing equipment is the final quality gate for brand lights leaving your line. Combining advanced optical measurement with AI algorithms, it performs 100% full inspection of every logo lamp — brightness uniformity, color temperature consistency, electrical performance and appearance defects — so only qualified products ship. Modular quick-change fixtures and full MES integration keep changeovers short and every result traceable, on the way to zero-defect manufacturing.
Logo Lamp EOL Testing Equipment for Brand Light Final Inspection
Accueil › Produits › EOL Testing › Logo Lamp EOL Testing Equipment
Selecting the right end-of-line testing equipment for your logo light production line is critical for product quality and manufacturing efficiency, and it comes down to three key factors: inspection accuracy, production throughput and long-term reliability. HY’s logo lamp EOL testing equipment delivers industry-leading precision with its advanced optical measurement system, measuring brightness uniformity within 2% accuracy and detecting micron-level defects, while the modular quick-change design allows rapid product switching in under 15 minutes — ideal for manufacturers handling multiple product lines.
Each station combines optical measurement, AI-based defect judgement and full electrical testing in one pass, checking brightness uniformity, color temperature consistency, pattern completeness and appearance defects on 100% of units. Every result is recorded and uploaded to your MES, so each shipped logo lamp carries a complete, traceable quality record.
Core Advantages
Every logo lamp on the line is inspected — no sampling. Optical measurement and AI algorithms check brightness uniformity, color temperature, electrical performance and appearance defects on each unit before it can leave the station.
High-resolution imaging measures brightness uniformity within 2% accuracy and resolves micron-level defects such as light leakage, dark spots and pattern flaws, giving consistent, repeatable judgement on every shift.
Modular quick-change fixtures switch the station between logo lamp variants in 15 minutes or less, and test profiles are set in software, so mixed production runs without long stops.
Self-developed software connects to your MES and ERP over OPC UA, Modbus and TCP/IP, with data dashboards, SPC statistical analysis and anomaly warnings, so every lamp’s test record is stored and searchable.
Technical Specifications
High-resolution imaging measures brightness uniformity within 2% accuracy across the whole logo pattern and resolves micron-level defects such as light leakage, dark spots and scratches.
Brightness uniformity, colour coordinates, colour temperature and contrast are measured on every unit, together with pattern completeness, character clarity and edge sharpness.
Voltage, current, power and power factor are tested on every lamp, with insulation resistance and withstand voltage checks and multi-range voltage switching for different product variants.
Self-developed software connects over OPC UA, Modbus and TCP/IP, integrating with MES and ERP systems including SAP, Oracle and Yonyou, with communication protocol testing on the line.
Modular quick-change fixtures switch the station between logo lamp variants in 15 minutes or less, and test profiles are configured in software within hours instead of weeks.
The station handles logo lamps and luminous signs over 1 metre wide, with multi-channel synchronous testing for dynamic effects, colour gradients and breathing modes.
Automotive OEM Logo Light Factory Inspection
OEM and Tier-1 lines use the station for final inspection of front grille logo lights, rear logo lights and welcome lights, verifying brightness uniformity, color temperature consistency, pattern completeness and lighting response time on every unit before delivery.
Consumer Electronics Brand Logo Inspection
For smartphones, laptops and wearables, the equipment inspects illuminated brand logos at micron level, catching light leakage and uneven brightness, with quick changeover between small-batch product variants.
Commercial Lighting & Signage Inspection
Large luminous signs and commercial logo lights — including signs over 1 metre wide — are checked for uniform brightness and colour across the whole surface, with customised inspection reports for each batch.
New Energy Vehicle Ambient Light Inspection
NEV interior lines test door logo lights, centre-console ambient lights and seat logo lights with multi-channel synchronous testing, verifying dynamic effects, colour gradients and breathing modes as well as static brightness and colour.
Packaging & Delivery
Every logo lamp EOL testing station is engineered and configured to order. After the factory acceptance test, the equipment is packed in protective export crating for international transport, and the delivery time is confirmed with the quotation according to the selected configuration.
Logo Lamp EOL Testing Features
- Consistent quality on every unit: 100% full inspection replaces sampling, so every logo lamp is judged against the same standard on every shift.
- Higher throughput: the station inspects hundreds of units per hour, keeping pace with mass production lines.
- Defect coverage beyond the eye: AI algorithms detect defects with over 99% accuracy, including micron-level light leakage and dark spots.
- Flexible, scalable stations: modular quick-change fixtures and software-set test profiles adapt to new variants, and stations scale from a single unit to full lines.
- Data for process improvement: complete test records with dashboards and SPC analysis typically lift overall equipment effectiveness by 30%.
- Specialist support: over ten years in optical inspection, more than 30 invention patents and full-process service from consultation to after-sales support.
Automated EOL Testing vs Manual Logo Light Inspection
Automated testing judges every logo lamp against the same programmed thresholds, while manual visual inspection varies between operators and shifts.
The station inspects hundreds of units per hour at line speed; manual inspection slows the line and becomes the bottleneck in mass production.
AI-based inspection detects micron-level defects — light leakage, dark spots, pattern flaws — with over 99% accuracy, beyond what the human eye can reliably catch.
Every result is recorded and uploaded to the MES for full traceability, reducing labour costs and giving production data that manual inspection cannot provide.
Optional Configuration
- Customized Optical Inspection Solutions
- Electrical Test Parameter Customization
- MES Data Interface Customization
Industrial cameras in different resolutions, spectral light sources and filter combinations are matched to your logo lamps, with custom algorithms for brightness uniformity, colour coordinates, colour temperature, contrast, character clarity, edge sharpness and pattern completeness.
Voltage, current, power, power factor, insulation resistance and withstand voltage ranges are configured to your product specification, with multi-range voltage switching and communication protocol testing.
Interfaces over OPC UA, Modbus and TCP/IP connect to your MES and ERP — including SAP, Oracle and Yonyou — with data dashboards, SPC statistical analysis and anomaly warning set up for your line.
It performs 100% full inspection of every logo lamp before shipment: brightness uniformity, colour temperature consistency, pattern completeness, character clarity and appearance defects such as light leakage, dark spots and scratches, together with electrical tests for voltage, current, power and power factor.
Brightness uniformity is measured within 2% accuracy, micron-level defects are resolved by high-resolution imaging, and AI algorithms detect defects with over 99% accuracy.
Modular quick-change fixtures switch the station between variants in 15 minutes or less, and test profiles are set in software, so mixed production runs without long stops.
Yes. The self-developed software connects over OPC UA, Modbus and TCP/IP and integrates with MES and ERP systems including SAP, Oracle and Yonyou, with data dashboards, SPC statistical analysis and anomaly warnings.
It handles standard logo lamps as well as large luminous signs over 1 metre wide, and multi-channel synchronous testing covers dynamic effects, colour gradients and breathing modes on ambient and welcome lights.
Get a Quote for the Logo Lamp EOL Testing Equipment
Send us your workpiece drawing and material — our engineers will reply with a configuration and quotation.
Send Inquiry | Email: vip@huayuautoline.com | WhatsApp: +86 18158897969
EOL Testing Equipment
Projection Lamp EOL Testing Equipment
Grille Lamp EOL Testing Equipment
Ambient Light Standalone EOL Testing Equipment
Français 
English 
Русский 
Español 
Português 
Tiếng Việt